All of North CarolinaEst. 2026

910-565-6491Email

Leak or storm damage?
Tar Heel Building Envelope & Roofing
Quote
Gravel low-slope roof with a white parapet, metal coping, and vent stacks.

Aging roofs fail at the edges.

The owner traces the leak, then repairs, recovers, or replaces.

Request a quoteCall 910-565-6491

Free estimates in Cumberland County, Wake County, and the surrounding areas, which include the Fayetteville and Raleigh/Triangle areas.

  • SBA-certified SDVOSB
  • VOSB
  • NRCA member
  • Est. 2026
  • Fully insured with a business owner's policy

What do you need?

Signs you need a service call

  • Ceiling stains
  • A musty odor
  • Drips
  • Blistering or ridging membrane
  • Ponding or overflowing drains
  • Loose edge metal or flashing

A small leak is worth a call now. The stain inside is often not the source.

Long corrugated metal roof on an industrial building, with roof vents and a metal tower behind it.

How it works

  1. 01

    Callback

    The owner calls you within 1–2 hours.

  2. 02

    On-site leak trace

    We follow the water back to the source.

  3. 03

    Photo report

    You get pictures of what we found.

  4. 04

    Written plan

    The recommendation is in writing before more work starts.

  5. 05

    Repair

    Built to NRCA guidelines and the manufacturer's details, when a repair is the plan.

How we detail the edges

Six typical sections for a low-slope roof. These are drawings, not photographs of a job.

  • Section drawing of a CMU parapet with sloped metal coping, continuous cleats, a drip hem, wood nailer, termination bar, counterflashing, sealant, a cant, membrane, cover board, rigid insulation, and a fluted steel deck. Typical detail, not for construction.
  • Section drawing of a roof edge with edge metal, a continuous cleat, a hemmed drip, a heat-welded cover strip over the flange, fasteners, a wood nailer, membrane, cover board, rigid insulation, and a fluted steel deck. Typical detail, not for construction.
  • Section drawing of a roof drain with a bolted clamping ring, membrane turned into the sump, tapered insulation, the drain bowl, and a fluted steel deck. Typical detail, not for construction.
  • Section drawing of a pipe through the deck, with a flashing boot, a stainless clamp, sealant, membrane, cover board, rigid insulation, and a fluted steel deck. Typical detail, not for construction.
  • Section drawing of an equipment curb with cants, membrane turned up and over the curb, a metal cap, wood blocking, cover board, rigid insulation, and a fluted steel deck. Typical detail, not for construction.
  • Section drawing of a single-ply lap seam, with the heat-weld at the leading edge and fastener plates under the lap, on a cover board, rigid insulation, and a fluted steel deck. Typical detail, not for construction.

Why us

  • The owner is on the work.

    You work directly with the owner. No commissioned sales rep and no rotating crew manager.

  • 100% tie-off.

    Work follows OSHA fall-protection rules, with 100% tie-off.

  • NRCA guidelines.

    Built to NRCA guidelines and the manufacturer's details.

Sectors we serve

  • Industrial and logistics

    TPO and PVC work planned around penetrations, scheduled so the building can keep operating.

  • Healthcare and clinics

    Low-VOC adhered roof systems where they limit odor in a building that stays occupied.

  • Education and municipal

    Work scheduled around budget cycles and the facility calendar.

  • Federal and defense

    Registration details are on the federal page. Federal page

Where we work

We serve all of North Carolina, including the Triangle, the Charlotte metro, the Triad, Fayetteville and the Sandhills, Wilmington and the coast, Eastern North Carolina, and the Mountains.

Covered industrial loading dock with concrete columns, roll-up doors, and a paved apron in low sunlight.

Questions

What should I do about an active leak?

Call 910-565-6491. Every call is answered. A phone assistant can relay the lead to the owner within minutes, and the owner calls back within 1–2 hours. That is a callback, not an on-site arrival and not a completed repair.

Should the roof be repaired, recovered, or replaced?

We decide from the condition of the roof, how far any moisture has spread, the remaining service life, and the budget. A repair is enough when the membrane and the deck can still do the job. A recover goes over a roof that is sound enough to leave in place. A replacement comes down to the deck when the assembly is worn out. We do not offer coatings.

How fast will I hear back?

The owner calls you back within 1–2 hours. A phone assistant can relay the lead within minutes. That callback is not an on-site arrival and not a completed repair.

Are you insured?

Tar Heel is fully insured with a business owner's policy. We do not publish a carrier, a policy number, or coverage limits.

Are you veteran-owned?

Yes. Tar Heel is an SBA-certified Service-Disabled Veteran-Owned Small Business (SDVOSB) and a Veteran-Owned Small Business (VOSB).

More questions

Have a leak, a project, or a bid coming up?

Tell us the building and what the roof is doing.

Request a quoteCall 910-565-6491[email protected]